(Lead-Free – RoHS Compliant)
United States Patent#7,861,915 “Foreign Patents also Issued and Pending”
1. Product and Company Identification
Commerical Description – MS2® Molten Solder Surfactant for use with lead-free (RoHS-compliant) & Tin/Lead
solder processes This product conforms to ANSI Z400. 1-1993 and ISO 11014
Manufactured by: P. Kay Metal, Inc.
2. Composition / Information on Ingredients
Description |
CAS Number |
Content |
Carboxy Alkanes |
67254-79-9 |
>93% |
Polyalpha Olefins |
68649-12-7 |
>5% |
Colorant |
Proprietory |
<1% |
Aromatic |
Esters None |
<1% |
NFPA (National Fire Protection Association)
Hazards Identification |
Not Considered as Hazardous |
Health |
0 – Insignificant |
Flammability |
1 – Slight |
Reactivity |
0 – Insignificant |
Special Hazards |
None |
3. Hazards Identification
Human Helath Hazards |
Inhalation |
Not Applicable at ambient temperature |
Skin |
Unlikely to be irritant |
Eye Contact |
Can cause irritation |
Ingestion |
Unlikely to be harmful unless excessive amount swallowed |
Physical/Chemical Hazards |
None identified |
Environmental Hazards |
None identified |
4. First Aid Measures
Inhalation |
Remove to fresh air |
Skin Contact |
Wash off with water and soap |
Eye Contact |
Wash off with water. Get medical attention if any sensation persists |
Ingestion |
Remove material from mouth. Drink plenty of water. If large amount swallowed or symptoms develop get medical attention |
5. Fire Fighting Measures
Extinguishing Media |
Dry chemicalwater spray/ foam/ carbon dioxide |
Unsuitable Extingusihing |
Media none |
Specific Hazards |
Thermal decomposition will evolve irritant vapors |
Protection of Fire Fighters |
Self-contained breathing apparatus/ full protective clothing |
6. Accidental Release Measures
Personal Precautions |
Avoid contact with eyes. Do not breathe vapor |
Environmental Precautions |
Minimize contamination of drains/ surface and ground water |
Methods for Cleaning Up |
Transfer product to suitably labeled containers for disposal at an approved site absorb liquid spillage on inert material (e.g. sand). Residues and small spillage may be washed away with water and detergent. |
Other information |
Spillages or uncontrolled discharge into watercourses must be alerted to the appropriate regulatory body. |
7. Handling and Storage
Handling |
No specific protective measures are required |
Storage |
Store in the original closed containers |
Other information |
For quality reasons: avoid elevated temperatures |
Shelf |
3 years from date of manufacture |
8. Exposure Control / Personal Protection
Engineering Measures |
Ensure ventilation or local exhaust if formation of vapor occurs |
Hygiene Measures |
Good industrial hygiene should be followed |
Occupational Exposure |
No occupational exposure limits have been established |
Personal Protective Equipment |
Normal precautions should be observed as for handling all chemicals. |
9. Physical and Chemical Properties
Physical State Liquid |
(20°C) |
Color |
Green |
Odor |
None |
PH |
Not applicable |
Boiling Point/Boiling Range |
>300°C |
Flash Point |
315° (COC) |
Flammability |
Not applicable |
Auto-ignition Temperature |
400° C |
Explosion Properties |
Not to be expected |
Oxidation Properties |
Not to be expected |
Density |
955 kg/m3 (25°C) |
Solubility in Water |
Insoluble |
Solubility in Other Ingredients |
Soluble in most organic solvents |
Viscosity |
7500 mPa.s (25°C) |
Volatile Organic Compound |
VOC Not volatile ambient |
10. Stability and Reactivity
Stability |
Stable under normal conditions |
Conditions to Avoid |
Not Known |
Materials to Avoid |
Oxidizing agents |
Hazardous Reactions |
None |
Hazardous Decompositions |
Products None |
11. Toxicological Information
Acute Toxicity |
Oral – LD 50 |
>2 g/kg (rat) |
Skin Irritation |
Not irritating (rabbit) |
Eye Irritation |
Not irritating (rabbit) |
Mutagenicity |
Negative (in-vitro short-term genotoxicity tests) |
12. Ecological Information
Persistance & Degradation |
(OECD 301B (28 Days) <10% – Not readily biodegradable |
LC 50 |
>100mg/l (fish – 48 hours) |
EC50 |
>100mg/l (Pseudomonas putida – 16 hours) |
NOEC |
>85mg/l (fish – 28 days) |
Not toxic at concentration well above the water solubility |
13. Disposal Consideration
Methods of Disposal Return to manufacturer for recycle. Contact P.Kay Metal,Inc.
14. Transportation Information
D.O.T. |
Classification Not restricted |
15. Regulatory Information
OSHA HCS |
(29 CFR Not hazardous 1920.1200) |
SATA Title III Section313 |
Not listed |
Inventory Status |
USA |
TSCA-CSI |
EU |
NLP List |
CANADA |
DSL |
Japan |
ENCS (8-3050) |
Australia |
AICS |
Korea |
ECL (16486) |
Philippines |
PICCS |
China |
SEPA/First import |
Switzerland |
Gifkklasse/frei: BAG-T Nr. 618400 |
16. History
Date of Previous Issue, 09/2012
Revised, 10/2012
Prepared by, J. Hardin
The information contained herein is based on data considered accurate and is offered solely for information, consideration and investigation. P. Kay Metal, Inc. extends no warranties, makes no representations and assumes no responsibility as to the accuracy, completeness or suitability of this data for any purchaser’s use.
The data on this Material Safety Data Sheet relates only to this product and does not relate to use with any other material or in any process. All chemical products should be used only by, or under the direction of, technically qualified personnel who are aware of the hazards involved and the necessity for reasonable care in handling. Hazard communication regulations require that employees must be trained on how to use a Material Safety Data Sheet as a source for hazard information. Department issuing MSDS: Product Safety Contact, MSDS Coordinator, P. Kay Metal, Inc.